Citerar och svarar mig själv.
Men hittade denna guide på:
Solved: Galaxy Watch Samsung Pay plug-In not installing - Page 7 - Samsung Community
Om någon följt den? Och kan bekräfta att den fungerar? Eller följt en annan guide?
Positivt verkar ju vara att man bara behöver göra det en gång och sen är det klart.
Så jag lägger in en brasklapp att jag har INTE provat detta själv. Har även redigerat in några extra punkter som skrevs mer om i forumet och svenska landskoder.
[EDIT]
Beställt en klocka så återkommer och uppdaterar guiden när jag provat och fått det att fungera.
You do
NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
Gear S3 Root and Kernel Source! (Android Wear Port Thread) - Post #330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Turn on developer mode (It can be enabled by clicking 7 times on Software Version.)
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat'
4. From the subfolder data\tools double click on 'sdb.exe'
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Sweden.
BAU = SWEDEN
BCN = SWEDEN
BME = SWEDEN
BSG = SWEDEN
BTH = SWEDEN
COV = SWEDEN
HTS = SWEDEN
SEN = SWEDEN
TET = SWEDEN
TLA = SWEDEN
XEE = SWEDEN
VDS = SWEDEN
TNO = SWEDEN
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up.
Enjoy your new watch with Samsung Pay enabled.
Click to expand...