körde in denna firmware som ligger på den här sidan official 4.1.1 Jelly Bean firmware UK
http://www.hotfile.com/dl/182319125/5934f97/P5110XXCLK7_P5110OXACLK7_BTU.zip.html
och odin v307
http://www.softpedia.com/dyn-postdownload.php?p=227649&t=4&i=1
med hjälp av guiden här
fungerade klockrent och all data och inställningar fanns kvar och den var fortfarande på svenska
1. Download Android 4.1.1 Jelly Bean firmware in zip and extract to your desktop. Inside the extracted folder, you will see a file with .tar.md5 extension.
2. Download Odin3_v3.04.zip and extract to your desktop.
3. Make sure you have either Samsung USB Drivers or Kies installed on your computer. If not, download it and install now.
4. Charge your Galaxy Tab 2 10.1 WiFi’s battery to at least 80% level.
5. Turn on USB Debugging on your device: Settings> Developer Options> USB Debugging
6. Backup your contacts, messages and other important data.
7. Turn off your device and boot it into Download Mode: press and hold Volume Up+Power buttons together for a few seconds and press the Volume Down key when prompted to continue to Download Mode.
8. Open Odin folder and run the Odin3 v3.04.exe program.
9. Connect you Galaxy Tab to computer via the USB cable that came with your device.
10. Wait till you see the ID:COM port turn blue and “Added!!” text on Odin’s message box.
11. Now click on PDA and select the .tar.md5 file found inside the extracted firmware zip package.
12. Ensure that only “F. Reset Time” and “Auto Reboot” options are enabled on the Odin.
13. Finally hit the “Start” button and wait for the installation to finish.
14. When installation is done, you will see a PASS! message at Odin your device will reboot automatically.
On rebooting you will have the new Jelly Bean firmware on your Samsung Galaxy Tab 2 10.1 WiFi.
Last edited: 7 september 2013